HazelPrinter.com  Loading... Please wait...

Our Newsletter

Roland VersaUV LEC 330 Printer Cutter

  • Roland VersaUV LEC 330  Printer Cutter


Bookmark and Share

Product Description

Product Description

Model  LEC-330
Printing technology  Piezo electric inkjet
Media Width 182 to 762 mm
Thickness Maximum 1.0 mm with liner, for printing
Maximum 0.4 mm with liner and 0.22 mm without liner, for cutting
Roll outer diameter Maximum 180 mm
Roll weight Maximum 20 kg
Core diameter 50.8 mm or 76.2 mm 
Printing/cutting width *1  Maximum 736 mm 
Ink cartridges Type Roland ECO-UV ink
Capacity 220 cc
Colours Six colours (cyan, magenta, yellow, black, white, and gloss)
Ink-curing unit  Dual UV-LED Lamp
Printing resolution (dots per inch) Maximum 1440 dpi
Cutting speed  10 to 600 mm/s (10 to 300 mm/s in media-feed direction)
Blade force  30 to 300 gf
Blade offset compensation  0.000 to 1.500 mm
Software resolution (when cutting) 0.025 mm/step 
Distance accuracy (when printing) *2 Error of less than ±0.3% of distance travelled, or ±0.3 mm, whichever is greater
Distance accuracy (when cutting) Error of less than ±0.4% of distance travelled, or ±0.3 mm, whichever is greater.
When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] has been made): 
Error of less than ±0.2% of distance travelled, or ±0.1 mm, whichever is greater.
Repeatability (when cutting) *3 ±0.1 mm or less
Alignment accuracy for printing and cutting *4 ±0.5 mm or less
Alignment accuracy for printing and cutting when reloading media *5 Error of less than ±0.5% of distance travelled, or ±3 mm, whichever is greater
Connectivity  Ethernet (10BASE-T/100BASE-TX, automatic switching)
Power-saving function  Automatic sleep feature
Power requirements  AC 100 to 240 V ±10%, 50/60 Hz, maximum 4.2A
Power consumption During operation Maximum 370 W
Sleep mode Approx. 15.3 W
Dimensions (with stand) *6  2200 (W) × 820 (D) × 1260 (H) mm
Weight (with stand)  177 kg
Environmental Power on Temperature: 20 to 32C [22C or higher recommended] , humidity: 35 to 80% (no condensation)
Power off Temperature: 5 to 40C, humidity: 20 to 80% (no condensation)
Accessories  Stand, power cord, blade, blade holder (XC-CH2), media clamps, replacement blade for separating knife, cleaning kit, software RIP (Roland VersaWorks ), user's manual, etc.

*1The length of printing or cutting is subject to the limitations of the program.
*2 Using Roland specified media, print travel of 1m, temperature: 25C, humidity: 50 %RH
*3 Using Roland specified media, loaded on the shaft, [PREFEED] menu item must be set to "ENABLE," with  25 mm or more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media.  Media 3,000 mm long.
*4 Provided that media length is under 3000 mm.  Temperature: 25C.  Excluding possible shift caused by expansion or contraction of the media and/or by reloading the media.
*5 Using Roland specified media, data size: 1000 mm in the media-feed direction, 736 mm in the carriage-movement direction.  No lamination.  Automatic detection of crop marks at four points when media is reloaded.   During cutting, [PREFEED] menu item must be set to "ENABLE." Temperature: 25C .  Excludes the effects of slanted movement and of expansion and contraction of the media.
*6 During operation of the media take-up system, an operating range of approximately 80 mm back from the front edge of the dancer roller is required.

Roland VersaWorks System Requirements
Operating system Windows Vista® Ultimate Service Pack 1 or Business Service Pack 1 (32-bit edition), Windows Vista® Ultimate or Business (32-bit edition), or Windows XP Professional Service Pack 2 or 3, or Windows® 2000 Service Pack 4
CPU 2.0 GHz or faster Pentium 4 recommended
RAM 1 GB or more recommended (2 GB or more recommended for Windows Vista®)
Video card and monitor A resolution of 1280 x 1024 or more recommended
Free hard-disk space 40 GB or more recommended
Optical drive DVD-ROM drive
Roland VersaWorks-Compatible Application Software
Adobe® Illustrator® 10, CS, CS2, CS3, CorelDRAW® 11, 12, X3

Vaporized components may slightly irritate the eyes, nose and/or throat during and following printing with this product.  If continuously printing in a closed space, the density of volatile compositions will accumulate and may irritate the eyes, nose and/or throat.  Roland strongly recommends that you install a ventilation system and use this product in a well-ventilated room.  For more information, please contact your local distributor or dealer.

About White Ink
The pigment in white ink will settle in the cartridge and ink flow system.  Due to the nature of white ink, you must shake the cartridge before each use.

Find Similar Products by Tag

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency Converter

Choose a currency below to display product prices in the selected currency.

United States Dollar
Australia Australian Dollar
Canada Canadian Dollar
European Union EURO
United Kingdom GBP
India Indian Rupee
New Zealand New Zealand Dollar

You Recently Viewed...

Hazel Printer